| Subject |
Answer ID |
Title |
| Solution |
24338 |
How to verify if a WD drive is 4K |
| Solution |
18083 |
WD Red Dives in a third party enclosure User Interface may display a failed message |
| Solution |
1471 |
A WD2500KS Serial ATA II hard drive incorrectly shows an 8 MB buffer instead of 16 MB buffer |
| Solution |
1331 |
Format of a WD drive or Solid State drive is shown as Raw in Disk Management under Windows |
| Solution |
317 |
A blank or black screen is displayed after installing a PATA (EIDE) drive and turning on the computer |
| Solution |
122 |
Error: "DISK I/O ERROR", "INVALID SYSTEM DISK", or "NO OS FOUND" while trying to boot your Windows computer |
| Solution |
14925 |
Windows or macOS cannot find my drive |
| Solution |
14920 |
How to check if a WD drive is damaged or defective |
| Solution |
11758 |
Windows Update does not detect a WD RED WD50EFRX/WD60EFRX or a WD Green WD50EZRX/WD60EZRX |
| Solution |
11748 |
While running a Quick Test on a WD Black² Dual Drive using Data Lifeguard Diagnostics for Windows, the Elapsed Time resets itself |
| Solution |
11359 |
Storing data simultaneously across the SSD and HDD portions of a Dual Drive causes data corruption. |
| Solution |
11088 |
Error: 'Completion Code: 53, Unsupported storage driver' occurs when running WD Black² Installation Software |
| Solution |
11087 |
Error: 'Completion Code: 52, Unsupported Windows version' occurs when running WD Black² Installation Software |
| Solution |
11086 |
Error: 'Completion Code: 23, Cannot Detect XLBA Range ' when running WD Black² Installation Software |
| Solution |
11085 |
Error: 'Completion Code: 10, Installation incomplete' occurs when formatting a WD Black² Dual Drive |
| Solution |
11084 |
Error: 'Completion Code: 5, Compliance Table is Corrupted' occurs when installing WD Black² Installation Software |
| Solution |
11083 |
Error: 'Completion Code: 4, Compliance Table Not Found' occurs when running WD Black² Installation Software |
| Solution |
11082 |
Error: 'Completion Code: 0, No Compliant Device Found' occurs when running WD Black² Installation Software on a Dual Drive |
| Solution |
11029 |
How to uninstall the WD Black² Installation Software and remove the HDD portion from a WD Black² Dual Drive |
| Solution |
11027 |
The HDD portion of a WD Black² Dual Drive is not able to be defragmented using Windows built-in defragmentation program |
| Solution |
11022 |
Disk Management shows unallocated space on a WD Black² Dual Drive after running the installation software |
| Solution |
11020 |
How to install the WD Black² Installation Software on a WD Black² Dual Drive |
| Solution |
11019 |
Error: 'Completion Code: 27, HDD portion contains partitions that must be removed before uninstallation' occurs when removing HDD space on a Dual Drive |
| Solution |
11015 |
WD Black² Installation Software fails to install, reporting a RAID configuration when the system is not configured on a RAID |
| Solution |
10489 |
How to redirect user data from Libraries, such as 'My Documents', to an alternate location on a Windows PC |
| Solution |
8575 |
When formatting or partitioning a drive, an error occurs stating the drive cannot be dismounted or unmounted |
| Solution |
6618 |
Error: 0x8078002A occurs when backing up to a 2.5 or 3.0 TB drive in Windows 7 Backup and Restore |
| Solution |
5697 |
How to improve the reliability and performance of an Advanced Format Disk on Windows 7 or Windows Server 2008 R2 |
| Solution |
5441 |
WD RE3 model drives are not working in an Intel Server Solution using Intel’s 2.14 Firmware |
| Solution |
5357 |
The S.M.A.R.T Attribute 193 Load/Unload counter keeps increasing on a SATA 2 hard drive |
| Solution |
5354 |
Windows File History or Windows Backup does not recognize a WD hard drive |
| Solution |
3875 |
How to disable power management settings in Windows |
| Solution |
3865 |
How to partition and format a WD drive on Windows and macOS |
| Solution |
3547 |
How to verify if a WD internal drive is functional when it is no longer recognized in Windows or Mac |
| Solution |
3263 |
The S.M.A.R.T Attribute 193 Load/Unload counter continue to increase for the WD RE2-GP SATA II hard drives |
| Solution |
1325 |
Formatting fails or an error is shown while formatting a hard drive in Windows |
| Solution |
1320 |
How to determine if a WD hard drive is compatible with a computer system or motherboard |
| Solution |
1295 |
Where to connect an external temperature sensor to a Serial ATA or EIDE hard drive |
| Solution |
1287 |
File and partition size limitations using the FAT32 file system (Windows and Mac) |
| Solution |
1271 |
How to enable or disable SSC (spread spectrum clocking) on WD Serial ATA hard drives |
| Solution |
1211 |
How to low level format or write zeros (Erase) to a WD hard drive or SSHD |
| Solution |
1198 |
How to move or copy files from one hard drive to another in Windows |
| Solution |
1154 |
SATA drive is not recognized by the system after installing a new SecureConnect SATA cable |
| Solution |
1103 |
How to remove Dynamic Drive Overlay from a hard drive |
| Solution |
1093 |
How to setup a large PATA/EIDE hard drive for use in Windows XP and 2000 |
| Solution |
1077 |
Why two identical drives with the same model number have slightly different capacities |
| Solution |
1054 |
The activity LED light for the hard drive on the computer case stay on or flashes eratically |
| Solution |
981 |
How to physically install, set jumper settings, and set up a Serial ATA, EIDE, or SSD drive in Windows |
| Solution |
935 |
The full capacity of an EIDE drive is not recognized by the system BIOS |
| Solution |
615 |
Drive displays a smaller capacity than the indicated size on the drive label |
| Solution |
602 |
Video editing software reports that the data rate of my drive is less than required |
| Solution |
344 |
Impact on drive performance when a slower drive is added to an ATA/100 drive to the computer |
| Solution |
332 |
Cannot format a partition larger than 32 GB using FAT32 in Windows |
| Solution |
319 |
Turning off the computer vs. leaving it on when it is not being used |
| Solution |
296 |
Installing a WD SATA, SAS, or PATA drive in an external USB/NAS enclosure or Personal Video Recorder |
| Solution |
295 |
How to disable power management for WD internal drives |
| Solution |
254 |
How to get power to a WD internal drive if no power connection is available |
| Solution |
121 |
How to install more than one operating system on a hard drive or dual boot a system |
| Solution |
59 |
How to check an internal drive for defects, problems, corruption, or a power issue |
| Solution |
8 |
How to Get an RMA to Replace a Defective Product, Obtain a Power Supply, or USB Cable for a WD Product |